Vibratory Plow
A vibratory plow buries cable, small pipe and conduit without opening a trench: a vibrating blade slices the ground while a feed system pulls the product into the slot behind it, and the ground closes over the top. It is the fastest, least disruptive way to install shallow utilities under lawns, boulevards and finished surfaces.
Cat classes
Choisissez une classe de taille — la capacité et la portée varient selon la gamme.
Fonctionnement
An eccentric-weight vibrator on the plow frame oscillates a narrow blade thousands of times per minute, momentarily fluidizing the soil around the cutting edge so the machine can draw the blade forward with a fraction of the static pull otherwise needed. The product—cable, duct or flexible pipe—feeds through a chute on the blade's trailing edge and lays at the blade's set depth as the machine advances. The slot left behind is a narrow slit rather than an open trench; surface restoration is typically a wheel-rolled seam. Larger units in the class combine plow, trencher and boring attachments on one utility tractor so a single machine handles turf plowing, road-edge trenching and under-drive crossings.
Types et variantes
- Walk-behind plows
- Pedestrian units up to 25 hp for irrigation wire, dog fence and low-voltage cable in finished lawns.
- Ride-on / tracked plow tractors
- Self-propelled utility tractors in the 25–60 hp band with plow attachments for production cable and fiber burial.
- Combination utility tractors
- Machines 60+ hp accepting interchangeable plow, trencher and reel attachments for full-service utility installation.
Spécifications clés
| Spécification | Plage typique | Signification |
|---|---|---|
| Engine power | 8.2–310 kW | The catalog bands the class at up to 25 hp (walk-behind and small units), 25–60 hp (standard ride-on tractors), and 60+ hp (large plows). |
| Operating weight | 327–21 668 kg | Catalog records span walk-behind units to the largest tractors in the class. |
| Hydraulic flow rate | 28–170 L/min | Powers the plow vibrator and product-feed systems across the class. |
Comment l'industrie le dimensionne
Vibratory plows are sized by engine power and by the depth and product size they can pull. The catalog bands the class at up to 25 hp, 25–60 hp, and 60+ hp. Walk-behind and small ride-on plows (up to 25 hp) handle irrigation, dog fence and low-voltage cable in a finished lawn. The standard cable plow (25–60 hp) handles fiber, electric and gas service lines pulled in without opening a trench. Large plows (60+ hp) handle main-line fiber and gas distribution across long runs and hard ground. Ground conditions size the machine as much as the product: heavier, higher-power units maintain pull in dense or rocky ground where light plows stall.
Applications
- Fiber and communication drop burial across lawns and boulevards
- Electric and gas service installation from main to meter
- Irrigation wire and small-pipe placement on developed properties
- Long-run rural cable plowing with ride-on tractors
- Golf course, campus and cemetery utility work where surface disturbance must be minimal
Sécurité et opération
- Call 811 and pothole conflicting utilities first—a plow blade slicing blind at burial depth is a classic strike mechanism.
- Keep hands and feet clear of the vibrating blade and feed chute during operation and product loading.
- Walk-behind units transmit vibration to the operator; manage exposure time per hand-arm vibration practice.
- On slopes and wet turf, tracked/ride-on units must respect slope limits—the drawbar load shifts the tipping line.
- De-energize or verify product before plowing live conductors; only approved live-line methods apply.
Normes et certifications
- CGA · Best Practices / 811
- Locate-and-verify process before any ground-slicing installation.
- OSHA · 29 CFR 1926 Subpart P
- Applies to potholing and any open excavation adjoining plow runs.
Questions fréquentes
How is a vibratory plow different from a trencher?
What can be installed with a vibratory plow?
What size plow does residential service work need?
Does plowing work in all ground?
Comparer les modèles populaires
Chercher par spécification →Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.
| Modèle | Poids en service | Profondeur d’excavation max | Portée max | Puissance moteur |
|---|---|---|---|---|
| Ditch Witch AT40 All Terrain Directional Drill | 3,697 lb (1,677 kg) | - | - | 160 hp |
| Vermeer D40x55 S3 HDD | 22,379 lb (10,151 kg) | - | - | 139 hp |
| Ditch Witch JT10 Directional Drill | 7,385 lb (3,350 kg) | - | - | 66 hp |
| Ditch Witch JT20 Directional Drill | 11,883 lb (5,390 kg) | - | - | 74 hp |
| Ditch Witch JT40 Directional Drill | 20,503 lb (9,300 kg) | - | - | 160 hp |
| Ditch Witch JT5 Directional Drill | 3,691 lb (1,674 kg) | - | - | 25 hp |
Équipements connexes
Parcourir par fabricant
Sources
Chaque spécification est vérifiée par rapport aux données publiées par le fabricant, avec la source liée pour référence.
Tous les modèles
96 modèles · Page 1 sur 2 · Chaque spécification citée à la source