1,000-2,000 cfm Air Mover
The 1,000-2,000 cfm air mover is the standard workhorse for restoration and water damage work, designed to move air across rooms and under cabinets to accelerate drying. This middle rung in the air mover ladder bridges the Up to 1,000 cfm Air Mover for tight spaces and the 2,000+ cfm Air Mover for commercial-scale work. Fifteen models from manufacturers including Xpower, Allegro, Phoenix, and B-Air deliver airflow between 1,000 and 1,763 cfm.
Cat classes
Pick a size class — capacity and reach differ across the range.
Key specifications
| Specification | Typical range | What it means |
|---|---|---|
| Airflow | 1,000–1,763 cfm | Volume of air moved per minute, determining coverage area and drying speed |
| Coverage Pattern | Across-room and under-cabinet | Directional airflow designed to reach beneath fixtures and across typical residential spaces |
| Operating Positions | Multiple angle settings | Adjustable positioning to direct airflow horizontally, vertically, or at intermediate angles |
How to choose
This 1,000-2,000 cfm band suits standard restoration jobs where air needs to reach under cabinets, across single rooms, and into moderately confined areas. The Up to 1,000 cfm Air Mover is the better choice for extremely tight crawl spaces, closets, or jobs requiring minimal power draw and maximum portability. The 2,000+ cfm Air Mover becomes necessary for large commercial spaces, multi-room drying, or when evaporation rates demand higher airflow volumes than this class can sustain.
What this size handles
- Drying water-damaged kitchens with airflow directed under base cabinets
- Residential water restoration following plumbing leaks or small floods
- Accelerating paint and floor coating cure times in single rooms
- Ventilating enclosed work areas during renovation or cleaning
- Moisture removal in basements and crawl spaces with moderate access
- Drying carpet and padding after extraction in residential settings
Safety & operation
- Grounded three-prong plugs required; GFCI protection recommended in wet environments
- Cord routing to prevent trip hazards when positioning units across traffic paths
- Ventilation intake screens kept clear of debris to prevent motor overheating
- Units positioned to avoid directing airflow onto electrical panels or open flame
Transport & logistics
- Portable by hand or hand truck; most units weigh 20-40 lb and feature integrated handles or recessed grips
- Multiple units stack in vans or pickup beds for multi-site restoration routes
- No trailer required; typical crew carries 4-8 units in a standard cargo van
Power & supply
- Standard 120V household circuits; typical draw 2-8 amps depending on speed setting
- Multiple units may require distribution across separate circuits to avoid tripping breakers
- Compatible with portable generators for sites without utility power
Frequently asked
How many air movers in this class are needed for a typical water damage job?
What differentiates models within the 1,000-1,763 cfm range?
Can this size class handle commercial water restoration jobs?
Compare popular models
Find by spec →Normalised to the same units. A dash means the figure was not published.
| Model | Airflow | Fuel capacity |
|---|---|---|
| Echo PB-9010H | 1,110 cfm | 83.8 gal |
| Echo PB-9010T | 1,110 cfm | 83.8 gal |
| Xpower M-25 | 1,450 cfm | - |
Related equipment
Browse by manufacturer
Sources
Every specification is verified against the manufacturer's published data, with the source linked for reference.
1,000-2,000 cfm Air Mover
17 models · Every spec cited to source
