Material Lifts and Conveyors

Material lifts raise ducts, beams, cabinets, and sheet goods into position without powered elevation platforms. Winch-operated material lifts lead the class, with drywall lifts and vacuum glass manipulators for their specialties.

195 Modelos4 Clases ● Cada especificación citada a la fuente

Material Lift

134 modelos

Portable Belt Conveyor

47 modelos

Glass and Glazing Manipulator

8 modelos

Drywall Panel Lift

6 modelos

Cómo funciona

A hand winch or crank drives cable over mast sheaves, raising the carriage; stabilizer legs keep the load's center inside the base. Capacity falls as height rises, published as a load-height chart. Drywall lifts pivot the sheet to angle, then crank it flush; vacuum manipulators hold glass while operators fine-adjust position.

Tipos y variantes

Material Lift: Portable winch- or crank-operated lift that raises ducts, beams, and equipment into place.
Drywall Lift: Wheeled lift that holds and positions drywall sheets for ceiling and wall installation.
Glass Manipulator: Vacuum-cup machine that lifts and precisely positions glass and panels.

Cómo elegir

Load and height select the unit: HVAC and steel-stud trades size material lifts by duct or beam weight at the needed lift height; a single hanger crew finishes ceilings with a drywall lift; glazing beyond safe two-person handling calls for a manipulator. All are indoor-friendly — no emissions, tight footprints, doorway-passable.

Normas y certificaciones

OSHA · 29 CFR 1926.300: General guarding and condition requirements for hand and power tools in construction.

Preguntas frecuentes

What is the difference between a material lift and a drywall lift?

Purpose-fit. A material lift hoists general loads on forks or a platform to 12-25 ft; a drywall lift cradles one sheet, tilts it to angle, and presses it to ceiling or wall for fastening.

How much can a material lift raise?

Common units handle roughly 300-650 lb at low height, less at full extension — the load-height chart on the mast is the governing document.

When is a glass manipulator worth deploying?

When panel weight or placement precision exceeds safe manual handling — storefront lites, interior glazing, and stone or solid-surface panels set on vacuum cups.