CAT CLASS: HQ-10201

45,000+ lb Wheeled Excavator

The 45,000+ lb wheeled excavator class represents the heaviest end of the wheeled excavator spectrum, built for highway maintenance, rail corridor work, and material handling operations requiring long stabilized reach. Operating weights span 20,800–23,424 kg with engine outputs of 172–181 hp and maximum dig depths reaching 19.9 ft. This size sits above the 30,000-45,000 lb class and represents the largest capacity in the three-tier wheeled excavator ladder.

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Operating weight	20,800–23,424 kg (45,860–51,640 lb)	Defines transport requirements, ground bearing pressure, and site access constraints for this heavy wheeled class.
Engine power	172–181 hp	Supports hydraulic flow for simultaneous digging and travel at roadside speeds with auxiliary attachments.
Max dig depth	13–19.9 ft (4.0–6.1 m)	Stabilized reach for utility trenching, slope work, and rail embankment excavation from outrigger-supported positions.

Comment choisir

This size is specified when projects demand maximum wheeled excavator reach and lifting capacity with highway mobility—typically large-scale roadway reconstruction, rail maintenance-of-way programs, and industrial material handling where tracked excavators lack the road speed or pavement-friendly ground pressure. The 30,000-45,000 lb Wheeled Excavator class suits most general highway maintenance and utility work with lower transport complexity and operating cost. No heavier wheeled excavator class exists; operations requiring greater digging force or reach transition to large tracked excavators or purpose-built rail equipment.

Ce que cette taille peut gérer

Interstate median barrier replacement and drainage reconstruction with lane-closure mobility
Rail corridor ballast excavation and tie replacement from track-adjacent positions
Bridge approach excavation and large-diameter utility installation along arterial roads
Industrial scrapyard material sorting and loading with grapple or magnet attachments
Flood-control channel maintenance requiring frequent repositioning along levee roads
Large-scale slope stabilization and rockfall cleanup on mountain highways

Sécurité et opération

Outrigger deployment and leveling mandatory before digging operations; machine stability algorithms monitor load moments and boom geometry to prevent tipover.
Rear-view and side-mounted cameras standard due to limited visibility during road travel and repositioning in confined rail or highway work zones.
ROPS/FOPS cab protection required; audible travel alarms and strobes for mixed-traffic environments where machine operates near active lanes.
Operator certification for both excavation and on-road travel; coordination with traffic control and railway authority flagging protocols where applicable.

Transport et logistique

Requires heavy-duty lowboy or RGN trailer rated for 52,000+ lb combined load; tractor with 400+ hp and appropriate permits for oversize/overweight movement.
Self-transports on public roads at 20–25 mph for regional moves within permit limits; stabilizer and blade retracted, boom secured in travel position.
Loading via reinforced ramps or hydraulic tilt deck; ground support and approach grading critical due to axle loads exceeding 20,000 lb.

Alimentation

Diesel fuel capacity typically 80–120 gallons; consumption 3–6 gph under load depending on auxiliary hydraulic demand and travel frequency.
Tier 4 Final emissions systems standard across current models; DEF (diesel exhaust fluid) replenishment required at regular service intervals.
Auxiliary hydraulic circuits support high-flow attachments (grapples, compactors, rail grinders) without supplemental power units.

Questions fréquentes

What distinguishes this class from tracked excavators in the same weight range?

Wheeled excavators in this class travel at highway speeds (20–25 mph) between work zones without trailers, avoid pavement damage from track wear, and provide faster repositioning on long linear projects like highways and rail corridors. Tracked excavators offer superior digging force and stability on soft or sloped ground but require trailering for all site-to-site moves.

How does outrigger footprint affect site planning for this size?

Full outrigger extension spans 14–18 ft depending on model, requiring lane closures or adequate shoulder width for stabilized operation. Rail work often positions the machine on ballast or access roads parallel to track; highway work typically stages from closed lanes or behind barrier with advance traffic control.

What attachment compatibility defines this size class?

Hydraulic flow rates of 60–80 gpm support heavy-duty grapples, compaction wheels, rail-specific tooling, and high-capacity buckets to 1.5+ cubic yards. Quick-coupler systems allow rapid changes between digging buckets and material-handling attachments common in maintenance-of-way and industrial applications.

Comparer les modèles populaires

Chercher par spécification →

Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.

Modèle	Poids en service	Profondeur d’excavation max	Portée max	Puissance moteur
Hitachi ZX220W-7	49,604 lb (22,500 kg)	19.9 ft (6.1 m)	32.9 ft (10.0 m)	172 hp
Takeuchi TB395W	51,641 lb (23,424 kg)	13 ft (4.0 m)	25 ft (7.6 m)	-
Develon DX190W-7K	46,187 lb (20,950 kg)	18 ft (5.5 m)	-	-
Develon DX210W-7K	50,706 lb (23,000 kg)	19 ft (5.8 m)	-	-
JCB JS200W	48,502 lb (22,000 kg)	-	-	172 hp
XCMG XE210WD	45,856 lb (20,800 kg)	-	-	181 hp