CAT CLASS: HQ-10333

Up to 6,000 lb Telehandler

Up to 6,000 lb telehandlers are the compact end of the telescopic handler ladder, designed for work where reach and footprint both constrain machine choice. With lift heights typically 19–30 ft and operating weights under 6,000 kg, these machines suit residential framing, light commercial construction, and any site where a larger telehandler cannot navigate or position. For higher reach or capacity, the next step is the 6,000–8,000 lb class.

331

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Lift capacity	2,000–5,500 lb (907–2,495 kg)	Maximum load at minimal extension; capacity decreases as boom extends and lifts.
Lift height	19–30 ft (5.8–9.1 m)	Vertical reach to place materials on second-story decks or light commercial rooflines.
Operating weight	920–5,935 kg (2,030–13,090 lb)	Machine mass provides stability; lighter units trade capacity for maneuverability.
Engine power	18–75 hp	Diesel or gasoline engines sized for compact hydraulic systems and travel speed.
Max travel speed	18.5–32 mph	Self-propelled transport between staging areas on larger sites.

Comment choisir

Up to 6,000 lb telehandlers are the correct choice when lift height under 30 ft is sufficient and the machine must navigate tight residential lots, narrow commercial alleys, or weight-restricted surfaces. When reach beyond 30 ft or capacity above 5,500 lb is required—common on multi-story wood framing or heavier material pallets—the 6,000–8,000 lb Telehandler class provides the necessary performance. This smallest size class prioritizes access and footprint over raw reach and load.

Ce que cette taille peut gérer

Single-family residential framing: placing lumber bundles on second-floor decks
Light commercial remodels in confined urban sites with limited staging area
Landscape supply yards moving bagged materials and small pallets in tight aisles
Residential roofing projects with shingle bundles lifted to single-story eaves
Agricultural operations handling hay bales and feed in barn aisles
Utility work staging poles and equipment along narrow right-of-way corridors

Sécurité et opération

Operators require telehandler-specific training covering load charts, boom extension, and tip-over geometry
Load capacity decreases with boom extension and angle; real-time load indicators are standard on most models
Jobsite traffic management necessary during travel; compact size does not eliminate blind spots
Ground conditions affect stability; soft soil or slopes demand reduced loads and careful positioning

Transport et logistique

Operating weights 2,000–13,000 lb allow transport on standard tandem-axle equipment trailers
Overall widths 1.2–1.8 m (4–6 ft) fit within legal trailer widths without permits
Loading via walk-on ramps or tilt-deck trailers; no crane assistance typically required

Alimentation

Diesel or gasoline engines; fuel tank capacities 35–145 L support full-day operation
No external electrical supply required; self-contained hydraulic and engine systems
Refueling from standard diesel or gasoline cans or on-site fuel trailers

Questions fréquentes

What distinguishes this class from a standard forklift?

Telehandlers in this class extend forward and upward via telescoping booms, providing reach beyond the machine footprint—forklifts lift vertically within a fixed mast. The boom allows placement over obstacles and at height, which forklifts cannot achieve.

How much reach loss occurs as load increases?

Load charts are model-specific, but capacity typically falls by 50% or more at full extension compared to fully retracted boom. Operators must consult the machine's load chart before every lift to avoid exceeding tip-over limits.

Can these machines work indoors?

Gasoline and dual-fuel models are suitable for ventilated indoor spaces; diesel units generally require outdoor use due to exhaust emissions. Floor load ratings and ceiling height must accommodate machine weight and boom clearance.

Comparer les modèles populaires

Chercher par spécification →

Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.

Modèle	Capacité de charge	Hauteur de levage	Puissance moteur
Genie GTH-5519 Telehandler	5,501 lb (2,495 kg)	18 ft (5.5 m)	63 hp
JCB 525-60	-	19.7 ft (6.0 m)	74 hp
JLG R-2632	-	-	-
JLG R-4045	-	-	-
JLG AE1932	-	-	-
Manitou MLT627	-	-	100 hp

Équipements connexes

6,000-8,000 lb Telehandler 40 8,000-10,000 lb Telehandler 32 10,000-12,000 lb Telehandler 22 12,000+ lb Telehandler 16

Parcourir par fabricant

Manitou 26 JLG 4 Genie 3 JCB 2 Skyjack 1 SkyTrak 1 Bobcat 1

Sources

Chaque spécification est vérifiée par rapport aux données publiées par le fabricant, avec la source liée pour référence.

jcb.com ↗jlg.com ↗skyjack.com ↗genielift.com ↗

Up to 6,000 lb Telehandler

38 modèles · Chaque spécification citée à la source