CAT CLASS: HQ-10355

1-2 ton Chain Hoist

The 1-2 ton chain hoist is the workhorse size class for lifting pumps, gearboxes, steel members, and similar loads on construction and maintenance sites. With load capacities ranging from 998 to 1800 kg, this band bridges light-duty rigging and heavier industrial lifting. It sits above the up-to-1-ton class and below the 2-5 ton range on the chain hoist ladder.

169

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Load capacity	2,205–3,968 lb (1,000–1,800 kg)	Range covers metric-ton-rated hoists and 2-ton imperial models; the upper end handles most industrial machinery components
Chain type	Alloy steel, typically Grade 80 or 100	Heat-treated alloy chain resists wear and shock loading
Lift height	3–6 m standard	Typical drop lengths for overhead rigging in commercial and industrial spaces; longer chains available
Operation	Manual hand chain or electric motor	Manual models dominate this band; electric versions reduce operator fatigue on repetitive lifts

Comment choisir

The 1-2 ton band suits most pumps, HVAC equipment, small machinery, and structural steel components up to 1800 kg. For loads under 1000 kg—small generators, compressors, or light fabrications—the Up to 1 ton Chain Hoist offers easier handling and lower suspended weight. When lifting larger motors, beam assemblies, or industrial gearboxes exceeding 1800 kg, the 2-5 ton Chain Hoist provides the required capacity and mechanical advantage. Match the hoist's working load limit to the actual suspended load, accounting for rigging hardware and dynamic forces.

Ce que cette taille peut gérer

Lifting a 1500 kg centrifugal pump into position in a wastewater treatment plant
Positioning a 1200 kg industrial gearbox during assembly line installation
Hoisting steel I-beams and channel sections during structural retrofit work
Suspending HVAC rooftop units weighing up to 1600 kg for maintenance access
Pulling engines and transmissions in heavy equipment repair shops
Raising precast concrete lintels and small architectural elements on commercial sites

Sécurité et opération

Inspect load chain, hooks, and latches before each lift; replace components showing wear, nicks, or deformation
Verify hoist is securely anchored to rated beam or trolley; never exceed the working load limit stamped on the unit
Ensure load is balanced and rigging angles distribute force evenly to prevent side-loading the hook
Keep all personnel clear of the load path during lifting and lowering operations; use tag lines for control

Transport et logistique

Manual models typically weigh 15–30 kg and transport in service vans or pickup beds without special equipment
Electric models with trolley may weigh 50–80 kg; loadable by two workers or pallet jack
Most units fit in standard toolboxes or on shelf racks; no trailer required

Alimentation

Manual chain hoists require no power source; operator pulls hand chain to lift load
Electric models typically run on 110V or 220V single-phase or 208-230V three-phase shop power
Pendant control cable length usually 1.5–3 m; verify cord reach to available outlets or junction boxes

Questions fréquentes

What is the difference between a 1-ton and a 2-ton hoist in this band?

Models rated at 1000 kg (metric ton) and 2000 lb (approximately 900 kg) both fall in this band, but true 2-ton (1800 kg) hoists offer double the capacity and heavier chain. Verify the nameplate working load limit matches the intended load.

Can a 1-2 ton chain hoist be used with a manual or powered trolley?

Most hoists in this class accept either plain or geared trolleys that ride on I-beams. Match the trolley's capacity and beam-flange width to the hoist and building structure.

How often does a chain hoist in this size class require inspection?

Industry standards call for frequent inspection before each use, periodic inspection monthly or quarterly depending on service class, and annual third-party inspection with load testing where mandated.

Comparer les modèles populaires

Chercher par spécification →

Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.

Modèle	Capacité de charge	Hauteur de levage	Puissance moteur
Demag DHR Rope Hoist	2,205 lb (1,000 kg)	-	-
Demag DH Hoist Units	2,205 lb (1,000 kg)	-	-
Harrington SNER Electric Hoist- 1 Phase	2,205 lb (1,000 kg)	-	60 hp
Harrington SNERM Trolley Hoist- 1 Phase	2,205 lb (1,000 kg)	-	60 hp
Ironton 57038	3,300 lb (1,497 kg)	5 ft (1.5 m)	-