← Rough Terrain Scissor Lift
CAT CLASS: HQ-10637
Up to 34 ft Rough Terrain Scissor Lift
Up to 34 ft rough terrain scissor lifts are designed for exterior work on unprepared surfaces—dirt, gravel, grass, and slopes—where slab-type scissors would bog down or trigger tilt protection. This band delivers platform heights to approximately 32 ft and combines all-terrain tires, oscillating axles, and diesel or dual-fuel powertrains to navigate sites without hardstanding. This is the entry tier of the rough terrain scissor ladder, above which the 34-45 ft Rough Terrain Scissor Lift extends reach and capacity for taller structures.
137
Modelos
10
Marcas
Cat classes
Elija una clase de tamaño — la capacidad y el alcance varían en la gama.
Todos los tamaños
137 modelos
Up to 34 ft
51 modelos
34-45 ft
12 modelos
45-55 ft
7 modelos
55+ ft
9 modelos
Otros tamaños
58 modelos
Especificaciones clave
| Especificación | Rango típico | Qué significa |
|---|---|---|
| Working height | 5.6–35.3 ft (1.7–10.8 m) | Maximum working height from ground truth range; assumes operator reach above deck. |
| Platform capacity | 926–5,512 lb (420–2,500 kg) | Rated load varies by model; heavier-duty frames support masonry tools and multiple operators. |
| Gradeability | 25–50% | Maximum slope the machine can drive on when stowed; terrain capability varies by tire and drivetrain. |
| Operating weight | 1,830–26,059 lb (830–11,820 kg) | Machine mass influences transport requirements and ground bearing pressure on soft sites. |
| Engine power | 16.0–61.1 hp | Diesel or dual-fuel engines provide propulsion and hydraulic power independent of mains supply. |
Cómo elegir
This size band suits exterior work at heights below approximately 34 ft on unprepared ground—building envelopes, canopies, signage, and light structural tasks on gravel or dirt pads. When the work sits above this range or requires greater reach over obstacles, the 34-45 ft Rough Terrain Scissor Lift offers extended elevation and typically heavier counterweights for stability. For jobs on poured slabs, asphalt, or finished floors where tilt sensitivity is not a constraint, electric slab scissors deliver quieter operation, narrower frames, and lower transport weights.
Lo que maneja este tamaño
- Exterior cladding and façade installation on two- to three-story buildings over unpaved perimeters
- Roofing and gutter work on commercial structures with gravel or dirt staging areas
- Signage installation and maintenance on retail centers with sloped parking lots
- Electrical and HVAC rough-in on construction sites lacking finished concrete pads
- Tree trimming and landscape lighting on golf courses, parks, and resort properties
- Masonry and stone veneer work on residential developments with uncompacted fill
Seguridad y operación
- Oscillating axles and tilt sensors prevent operation on slopes exceeding the machine's gradeability rating; operators must verify ground conditions before ascent.
- Wider wheelbases and lower centers of gravity than slab scissors improve stability on uneven terrain, but lateral shifts in soft soil still demand caution.
- Outriggers are not standard; stability depends on chassis design and adherence to manufacturer load charts for sloped or unlevel surfaces.
- Engine exhaust and noise levels require consideration of site ventilation and proximity to occupied structures; emission standards vary by jurisdiction and model year.
Transporte y logística
- Machines in this range typically require a 10,000–14,000 lb capacity tandem-axle trailer or larger; heavier models approach 12 metric tons and necessitate tri-axle equipment trailers.
- Towing a loaded trailer demands a heavy-duty pickup or medium-duty truck rated for the combined gross weight, often exceeding 7 metric tons.
- Loading via walk-on ramps or hydraulic tilt decks; confirm deck width accommodates machine widths of 1.8–2.3 m and that ramp angle does not exceed gradeability limits.
Alimentación
- Most models run on diesel fuel; tank capacities of 37.9–113.6 liters support a full workday of intermittent lifting and driving.
- Dual-fuel variants accept propane as an alternative, reducing emissions on environmentally sensitive or enclosed outdoor sites.
- No external electrical connection required; onboard engine powers hydraulic pump and drive motors independently.
Preguntas frecuentes
What distinguishes rough terrain scissors from slab scissors in this height range?
Rough terrain models feature all-terrain tires, oscillating axles, and onboard engines to operate on unpaved, sloped, or soft ground where slab scissors would bog down or exceed tilt limits. Slab scissors offer narrower frames and electric drive but require firm, level surfaces.
How much ground bearing pressure do machines in this class exert?
Ground pressure varies by model weight and tire footprint but typically ranges from 30 to 80 psi. Operators must confirm soil compaction and bearing capacity meet or exceed machine specifications to prevent sinking or tipping.
Can this size navigate through standard doorways or gates?
Machine widths of 1.8–2.3 m exceed most single-door openings; this class is intended for outdoor use. Transit through gates or between buildings requires verifying clearance at the widest point of the chassis.
Comparar modelos populares
Buscar por especificación →Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.
| Modelo | Altura de trabajo | Capacidad de plataforma |
|---|---|---|
| JLG ERT2669 | 26 ft (7.9 m) | 1,499 lb (680 kg) |
| JLG RT2669 | 26 ft (7.9 m) | 1,499 lb (680 kg) |
| JLG RT3369 | 32 ft (9.8 m) | 1,001 lb (454 kg) |
| Genie GS-3390 | 39.6 ft (12.1 m) | 5,512 lb (2,500 kg) |
| Haulotte Compact 10 DX | 33.5 ft (10.2 m) | 1,246 lb (565 kg) |
| JLG ERT3369 | 32 ft (9.8 m) | 1,001 lb (454 kg) |
Equipos relacionados
34-45 ft Rough Terrain Scissor Lift 1245-55 ft Rough Terrain Scissor Lift 755+ ft Rough Terrain Scissor Lift 9
Explorar por fabricante
Fuentes
Cada especificación se verifica con los datos publicados por el fabricante, con la fuente enlazada como referencia.
Up to 34 ft Rough Terrain Scissor Lift
51 modelos · Página 1 de 2 · Cada especificación citada a la fuente
JLG 330LRT
11,819 lb (5,361 kg)
→
JLG 500RTS
→
Snorkel TM12
18.4 ft (5.6 m)
1,830 lb (830 kg)
→
Snorkel TM12E
18.5 ft (5.6 m)
1,852 lb (840 kg)
→
Dingli JCPT1218RT
12 ft (3.7 m)
1,001 lb (454 kg)
→
Dingli JCPT1418RT
14.3 ft (4.4 m)
800 lb (363 kg)
→
Dingli JCPT1523HRT2
15 ft (4.6 m)
1,499 lb (680 kg)
→
Dingli JCPT1523MRT2
15 ft (4.6 m)
1,499 lb (680 kg)
→
Dingli JCPT1523RTB
15 ft (4.6 m)
1,499 lb (680 kg)
→
Dingli JCPT1523RTL2
15 ft (4.6 m)
1,499 lb (680 kg)
→
Snorkel S3215E
21 ft (6.4 m)
2,701 lb (1,225 kg)
→
Dingli JCPT1823HRT2
18 ft (5.5 m)
1,499 lb (680 kg)
→
Dingli JCPT1823MRT2
18 ft (5.5 m)
1,499 lb (680 kg)
→
Dingli JCPT1823RTB
18 ft (5.5 m)
1,499 lb (680 kg)
→
Dingli JCPT1823RTL2
18 ft (5.5 m)
1,499 lb (680 kg)
→
Snorkel S3219E
25.6 ft (7.8 m)
3,170 lb (1,438 kg)
→
Dingli JCPT1923RTL
19 ft (5.8 m)
1,499 lb (680 kg)
→
Snorkel S2255RT
26.6 ft (8.1 m)
926 lb (420 kg)
→
Snorkel S2255RTE
27.9 ft (8.5 m)
5,313 lb (2,410 kg)
→
Dingli JCPT2223HRT
22 ft (6.7 m)
1,653 lb (750 kg)
→
Dingli JCPT2223RTB
22 ft (6.7 m)
1,653 lb (750 kg)
→
Skyjack SJ6826 RT
32.5 ft (9.9 m)
6,400 lb (2,903 kg)
→
Genie GS-68
32.5 ft (9.9 m)
6,374 lb (2,891 kg)
→
Genie GS-68RT
32.5 ft (9.9 m)
6,374 lb (2,891 kg)
→
JLG RT2669
26 ft (7.9 m)
1,499 lb (680 kg)
8,627 lb (3,913 kg)
→
JLG ERT2669
26 ft (7.9 m)
1,499 lb (680 kg)
8,627 lb (3,913 kg)
→
Genie GS-2669-RT
32.8 ft (10.0 m)
7,150 lb (3,243 kg)
→
Snorkel S2770RT
33 ft (10.1 m)
1,250 lb (567 kg)
6,173 lb (2,800 kg)
→
Snorkel S2770BE
33 ft (10.1 m)
7,024 lb (3,186 kg)
→
Dingli JCPT2825HRT
28 ft (8.5 m)
2,205 lb (1,000 kg)
→
Dingli JCPT2825RT
28 ft (8.5 m)
2,205 lb (1,000 kg)
→
Snorkel SL30RTE
35.3 ft (10.8 m)
7,606 lb (3,450 kg)
→
MEC 3084RT Speed Level
30 ft (9.1 m)
1,499 lb (680 kg)
→
Skyjack SJ6832 RT
38.5 ft (11.7 m)
8,876 lb (4,026 kg)
→
Dingli JCPT3225HRT
32 ft (9.8 m)
2,205 lb (1,000 kg)
→
Dingli JCPT3225RT
32 ft (9.8 m)
2,205 lb (1,000 kg)
→
Genie GS-3268 RT
38.7 ft (11.8 m)
→
Genie GS-3369R
39.2 ft (11.9 m)
7,599 lb (3,447 kg)
→
Snorkel S3370RT
39.4 ft (12.0 m)
1,001 lb (454 kg)
7,981 lb (3,620 kg)
→
MEC 3369ERT
39.4 ft (12.0 m)
1,001 lb (454 kg)
→
MEC 3369RT
39.4 ft (12.0 m)
1,001 lb (454 kg)
→
JLG 330CRT
9,720 lb (4,409 kg)
→
Snorkel S3370RTE
39.4 ft (12.0 m)
7,981 lb (3,620 kg)
→
Haulotte Compact 10 DX
33.5 ft (10.2 m)
1,246 lb (565 kg)
7,275 lb (3,300 kg)
→
Skyjack SJ9233 RT
→
JLG RT3369
32 ft (9.8 m)
1,001 lb (454 kg)
9,427 lb (4,276 kg)
→
JLG ERT3369
32 ft (9.8 m)
1,001 lb (454 kg)
9,427 lb (4,276 kg)
→
JLG RT3394
33 ft (10.1 m)
2,249 lb (1,020 kg)
11,843 lb (5,372 kg)
→
Página 1 de 2
Sig. →